CR Investigation of Sub-zero Treated SKD 11 on WEDM: A Taguchi Approach |
||||
|
||||
|
||||
BibTeX: |
||||
@article{IJIRSTV2I5068, |
||||
Abstract: |
||||
Using Taguchi’s parameter design, significant process parameters affecting the response characteristics are identified as pulse-on-time, pulse-off-time, servo voltage and wire feed. It has been observed that a combination of optimal parameters for each response characteristics is different. In this study, the process parameters namely the pulse-on-time, pulse-off-time, servo voltage and wire feed are optimized with considerations of performance characteristics, such as cutting speed. To validate the study, confirmation experiment has been carried out at optimum set of parameters and predicted results have been found to be in good agreement with experimental findings. |
||||
Keywords: |
||||
WEDM, Sub-zero treated, SKD 11, Cutting rate |
||||