BibTeX:

@article{IJIRSTV1I8010,
     title={An Investigation Of Temperature, Surface Roughness And Material Removal Rate During Hard Turning Of En19 Material - A Review},
     author={Mr. Amol N. Varade and Mr. Kamlesh P. Kadia},
     journal={International Journal for Innovative Research in Science & Technology},
     volume={1},
     number={8},
     pages={9--13},
     year={},
     url={http://www.ijirst.org/articles/IJIRSTV1I8010.pdf},
     publisher={IJIRST (International Journal for Innovative Research in Science & Technology)},
}

The main aim of this Project work is to study experimentally the influence of depth of cut, cutting speed, and feed rate on the tool tip temperature, Material Removal Rate, Surface Roughness during turning process. The experiments will be obtained by varying one parameter while, the remaining two parameter were kept constant. So the influence of tool tip on different machining parameters is done in this research work. To increase the tool life, Taguchi Optimization method is used to optimization of machining parameters. The Taguchi method, a powerful tool of design optimization for quality, is used to find the optimal cutting parameters for turning operations. Through this study, not only the optimal cutting parameters for turning operations are obtained, but also the main cutting parameters that affect the cutting performance in turning operations will be evaluated. Experimental results will be provided to confirm the effectiveness of this approach. It will give the best result for turning operation of EN19 Material.

EN19, MRR, Surface Roughness, Temperature, Optimization.