Parametric Optimization Of Cutting Force And Temperature During Hard Turning Of Inconel 625 - A Review |
||||
|
||||
|
||||
BibTeX: |
||||
@article{IJIRSTV1I8012, |
||||
Abstract: |
||||
In this review paper the results of an experimental investigation about the effect on Inconel 625 during hard turning using cubic boron nitride (CBN) based ceramic cutting tool. Turning experiments were carried out at different cutting speeds, feed rates and depth of cut. Tool performance was evaluated with respect to temperature, cutting forces generated during turning. The effect of cutting speed, depth of cut and feed rate on cutting forces & temperature during hard turning of Inconel 625 was experimented and analyzed by using taguchi method. Than optimize the cutting force & temperature using analysis of variance (ANOVA) technique. |
||||
Keywords: |
||||
Hard Turning, Inconel 625, CBN Cutting Tool. |
||||