BibTeX:

@article{IJIRSTV3I9057,
     title={A Review on Influence of Process Parameters and Electrodes Materials in EDM Process},
     author={Hardikkumar Prakashbhai Patel and Rajat Dave},
     journal={International Journal for Innovative Research in Science & Technology},
     volume={3},
     number={9},
     pages={98--100},
     year={},
     url={http://www.ijirst.org/articles/IJIRSTV3I9057.pdf},
     publisher={IJIRST (International Journal for Innovative Research in Science & Technology)},
}

Electrical discharge machining (EDM) is non-traditional machining processes. EDM process is based on thermoelectric energy between the work piece and a tool electrode. A pulse discharge occurs in a small gap between the work piece and the tool electrode and removes the unwanted material from the material through melting and vaporizing. The present study discusses about having an overview of the Electrical discharge machining process, and influence of process parameters like input current, pulse on time and pulse off time on performance parameter such as MRR, EWR and over cut. This study discusses about controlling the process parameters and optimization of process parameters in EDM process. From the review, it has been observed that the machining process can be improved by process parameters like current, pulse on time and pulse off time and also observed that electrodes material also effect on the material removal rate, electrode wear rate and over cut.

EDM, MRR, EWR, SR, OC, Taghuchi