BibTeX:

@article{IJIRSTV5I11018,
     title={Stress Concentration of Mild steel Plates using Different Cut-Out},
     author={Laxman Bharambe and Dr. S. I. Kolhe},
     journal={International Journal for Innovative Research in Science & Technology},
     volume={5},
     number={11},
     pages={74--79},
     year={},
     url={http://www.ijirst.org/articles/IJIRSTV5I11018.pdf},
     publisher={IJIRST (International Journal for Innovative Research in Science & Technology)},
}

Analytical investigation is undertaken to study the stress analysis of plates with different central cut-outs. The understanding of the effects of cut-out on the load bearing capacity and stress concentration of such plates or shells is very important in designing of structures. Particular emphasis is placed on flat in finite plates subjected to a uni-axial tension load. The results based on analytical solution are compared with the results obtained using finite element methods. The objective of this study is to demonstrate the accuracy and simplicity of presented analytical solution for stress analysis of plates with special shaped central cut-out. The varying parameters, such as cut-out shape, load direction or cut-out orientations, which affect the stress distributions and stress concentration factor in the metallic plates, are considered. The results presented herein indicated that the stress concentration factor of metallic plate significantly changed by using special shape cut-out, bluntness and orientation.

Stress Analysis, FEA (ANSYS), Von Misses Stress Bluntness